The oil pressure switch on a 1996 Chevrolet Cavalier is on the rear of the engine block. It will be directly above the oil pan.
On your 1996 Chevrolet Cavalier 2.2L SFI OHV , the Oil Pressure Switch is located: Under hood, center, front engine area, next to transmission bellhousing, mounted on engine block.
Your 1996 Chevrolet Cavalier 2.2 liter engine oil pressure should be approximately 40 psi. A range of 35 to 45 psi is acceptable.
The step-by-step instructions on how to change a 1997 Chevrolet Cavalier LS 2.2l electrical-switch relay oil pressure switch is not stated, it is best to download a free Chevrolet Cavalier manual for further information.
Type your answer here... oil pressure switch location
Is it ecotec or not? if not, the oil pressure switch is located 2 inches to the left of the oil filter on the back of the motor
The oil pressure is located on the side of the engine block. The switch has a black plug with three wires connected to it.
The oil pressure switch is on the top rear of the engine, there is only one.
Yes
Hi'I also have a 1996 Millenia, just changed my out. At front of your engine 2.5 just over your oil filter, you have to unplugg the pressure switch wire befre you can get the socket on it.
I don't know what you mean by an oil pressure "switch". A "switch" is something that you switch ON or switch OFF. Neither of these applies to oil pressure. If you mean the oil pressure sensor, it's on the engine somewhere, probably in the front. About and inch in diameter and 2 - 3 inches tall with a couple of wires or a brass tube coming out of it.
The oil pressure sender or switch is located at the rear of the engine, behind the distributor.
under the bonnet