The oil pressure sending switch on a 1988 Chevrolet Celebrity with 2.8L V6 is located on the bottom of the block near the oil filter.
It on the back of the coil packs going into the side of the block.
The fuel pump on your 1988 Chevy Celebrity is in the fuel tank.
If your 1988 Chevrolet Celebrity has the V6 engine the oxygen sensor is in the middle of the exhaust manifold nearest the firewall. If you have the 4 cylinder engine the oxygen sensor is located in the exhaust manifold just above the exhaust pipe flange.
To locate the thermostat on a Chevy Celebrity follow the upper radiator hose to the coolant outlet, which is mounted to the top of the thermostat housing.
The 1988 Chevrolet Celebrity uses distributor-less ignitions. Timing is controlled by the ECM, there is no provision for adjustments.
No there are shock absorbers on the rear.
Metal.
R12 unless it's been converted.
were is the fuel regulator located on a 1988 chevrolet celebrity ? The fuel pressure regulator is located under the intake manifold on the 2.8 V-6 engine but the pressure (Schrader type) test valve port is on the front of the engine to the right and just below the oil filler cap.
The oil sending unit is below the intake manifold, it is threaded into the block.
The firing order for all of the Chevy Celebrity 4 cylinder engines is: 1 3 4 2
The 1988 Chevrolet Celebrity uses idistributorless ignition systems, the timing is controlled by the ECM. there is no provision for adjustment.