As long as they are the same size and all the plumbing and eletrical line up. A 3.3 liter into a 3.3 liter, for example.
It is located on top of the transmission next to where is mounts up with the motor
The transmission in an Intrepid does not have any bands in it.
The 1994 Dodge Intrepid O2 sensor is located on the outside of the air cleaner housing. The sensor is on the back side of the housing.
A 1994 Intrepid is OBD1. The connector is a 6 way under the dash on the driver side.
Depends on if you have a lift or not. You can take it out from the top, or if you have a lift, remove the engine cradle and lower it down.
No, just one under the housing where the upper radiator hose hooks to the engine.
Blown fuse? Bad blower motor? Bad resistor pack at blower motor? Bad switch?
It is on the back of the engine, just to the side of the distributor.
Dodge does not use inertia switches.
It is on the column on the right.
how do you program a keyless remote for a 94 Dodge Intrepid. I battery died and now the horn keeps going off
It is on the front of the driver side of the block.
Back of the engine block, next to the distributor.
There was no 1994 Neon.There was no 1994 Neon.
go on bing.com
Down the transmission dipstick tube.
Chrysler calls it a 42le
trying to replace the starter on a 1995 3.3 dodge intrepid! what problems if any can i anticipate?