Perhaps it is your pcv valve or rubber elbow connector that is hooked up to the pcv valve.
what year??old one like 90 and back in v cover 90 and newer in intake
Just below throttle body, it fits onto a breather pipe runs from the valve cover routing under the intake manifold. A small pipe connects the pcv to the intake manifold
in the front of the engine on the right side of the engine. next to the plenum. you will see a black hose that leads into a small metal valve that screws to the engind. if you pull the hose off you can remove it with a deepwell socket. not your average looking pcv valve.
Go to this URL; http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/1a/36/de/0900823d801a36de.jsp
Its not A PVC Its A PCV Value Its not A PVC Its A PCV Value
The PCV valve on a 1999 Bravada is located near the oil filter. It is on the passenger side of the engine compartment.
The PCV valve on a 1999 Astro should be located on top of the valve cover. It plugs in and can be easily replaced.
The PCV valve is located in the valve cover
The PCV valve is located on top of the engine, just right of the intake manifold. One end is pushed in the hose that comes out of the top of the valve cover, the other end goes to a short length tube connected to the throttle throat.
The 1999 Chevy Geo Metro 1.0 liter engine PCV valve can be found on top of the engine. The PCV valve will be behind the air cleaner housing.
The PCV valve for a 1999 Regal 3.8 is located on the top of the valve cover. The valve pulls out to replace it.
The PCV valve is found in the valve cover on the passenger side.
The PCV valve on a 1999 GMC Jimmy is located on top of the engine, on the left side. It connects the valve cover to the intake manifold.
Wete does the pcv tubing go on1999 chevy lumina
sohc or dohc?
There is a great write-up with pics on how to change the PCV valve at: http://macgp.clubgp.com/howto/pcv/pcv.html Hope this helps. G
The PCV valve located is on top of the valve cover. It is right beside of the oil filler cap.
next to the oil fill cap, there is a hose take it off and there is the pcv with some letters on it.
Yes, both the 6 cylinder and 4 cylinder engines have PCV (Positive Crankcase Ventilation) valves.
PCV valve is located on the of the valve cover. There is a hose connecting the valve and the intake manifold. You should not have problems locating it.
Blow by. Oil will come out where you don't want it to.
The PCV value on a 2003 Dodge Durango is on the side of the oil fill shaft.
Automobile PCV valves can leak oil.Not sure where it is on that model;it will be attached to a hose assembly to let air from the crankcase (bottom of the engine) get sucked back into the intake (top of the engine).AnswerThe pcv value is located on the value cover next to the oil cap. The pcv value has a hose attached to it that goes from the pcv value to the bottom of the fuel injector. Once you remove this hose, the value can be easily removed with a 3/4" or 20mm wrench.
RIght up top in the center of the rear valve cover.