PCV valve is under the induction system
No, on the 3S-FE there is no PCV valve or grommet. This is the 4cylinder model. The camry V6 of the same year on the other hand, does utilize a PCV valve in its crankcase ventilation system.
valve cover
Change the PCV valve, it helps and or eliminates this. I have a 96 200sx ser change the PCV valve it helps or eliminates this problem. This helps also on 95-2000 sentras including the 2.0L
The PCV valve on a 1987 - 1990 Chevy Celebrity is in the top center of the valve cover nearest the firewall.
I am assuming you mean for a 1994 Honda Accord 4cylinder......it is the L shaped plug in the middle of the valve cover near the back of the engine. To is a rubber hose connecting the pcv valve to the intake manifold. With a set of pliars squeeze the metal retaing clip and pull the pcv valve out, then pull it out of the engine valve cover. You do not need to screw anything. The install is reverse, hope that helps.
Pull upward on the hose that the PCV valve is in. The PCV valve will pull out of the hose. The PCV valve is located in the valve cover.
It is located behind (toward the rear of truck) The oil add chamber on the passanger side valve cover. Pull the hose out of the valve cover and there you'll find the PCV Valve
Coming out of intake manifold and going into rocker cover
Disconnect the PCV valve tube from the PCV valve.Disconnect the PCV valve electrical connector if it has one.Turn the PCV valve counterclockwise to remove from the valve cover.To install, reverse the removal procedure.
Remove the PCV valve retaining screws. Remove the PCV valve hose. Reverse the process to install the new PCV valve.
front side of plastic intake manifold
The PCV valve has a check ball in it, That's what you are hearing. REPLACE PCV VALVE