Want this question answered?
It is located on the clutch slave cylinder. The slave cylinder is mounted on top of the transmission. Have someone push on the clutch cable and you will see movement on the cylinder.
16 valve 1.6 liter 4 cylinder.
THE FUEL FILTER FOR A 91 GEO TRACKER IS LOCATED UNDER THE CAR NEXT TO THE FRAME BY THE REAR AXLE NEAR THE FUEL TANK.
The 1990 Geo Tracker IAT sensor is located on the top of the transmission. The IAT sensor will be near the back of the transmission.
in the glove box
between the grill and the rad
`By disengage I assume you mean you can't change gears or get it out of gear. You may be able to change gears if it is not running. If this is so, it is one of several possibilities. You have a hydrolic clutch. The master cylinder can be empty, or more likely, the slave cylinder located on the transmission housing is bad. You should be able to see the slave cylinder. Have someone push the clutch in and see if there is any movement in the slave. The clutch disc can be screwed up, but that's a long shot.
The speed sensor for a 1996 Geo Tracker is located on the transmission housing. The speed sensor is important , it keeps track of the tires and delivers the figures to the main system
IN FRONT OF THE GAS TANK
in the dist.
Hi, The slave cylinder is on the side of the transmission. The hydraulic clutch system bleeder valve is on the slave cylinder. If you're bleeding the cluth, remember to have a jar and some clear plastic to bleed the system and never re-use the fluid you remove from the clutch master cylinder or the slave cylinder. Good luck and I hope it's a warm day for you. Please remember to use jack stands or heavy metal ramps. Steve H.
i have 1995 4x4 geo tracker with a bad auto transmission will a auto transmission out 1998 4x4 geo tracker fit in 1995