Hi, The slave cylinder is on the side of the transmission. The hydraulic clutch system bleeder valve is on the slave cylinder. If you're bleeding the cluth, remember to have a jar and some clear plastic to bleed the system and never re-use the fluid you remove from the clutch master cylinder or the slave cylinder. Good luck and I hope it's a warm day for you. Please remember to use jack stands or heavy metal ramps. Steve H.
if youre referring to the bleeder valve, its on the clutch slave cylinder bolted to the transmission
On the clutch slave cylinder
It is located on the clutch slave cylinder. The slave cylinder is mounted on top of the transmission. Have someone push on the clutch cable and you will see movement on the cylinder.
The clutch can't be adjusted. It is an hydraulic clutch. The clutch pedal sends pressure from the master cylinder to the slave cylinder on the clutch. IF you are having trouble with it the thing to do is bleed the air out at the slave cylinder. Have an assistant pump the clutch and hold it to the floor. Then open the bleed valve on the slave cylinder to let the air out of the system. On the final bleed hold the clutch to the floor and close the bleed valve on the slave cylinder. The clutch master cylinder operates of the brake fluid reservoir. Make sure you keep this full of brake fluid as you bleed the clutch.
It SHOULD be on the clutch slave cylinder. Follow the hydraulic line from the clutch master cylinder down to the slave cylinder. Depending on the vehicle, it could be behind the dust cover of the bell housing.
yes,open bleeder valve on cluch slave cylinder and clutch damper to release air.
It is on top of the slave cylinder hope this helps
Bleed the clutch line that runs from the clutch master cylinder to the slave cylinder utilizing the bleed valve on the slave cylinder.
The same way you bleed brakes, but use the little bleeder valve on the slave cylinder. The same way you bleed brakes, but use the little bleeder valve on the slave cylinder.
The clutch bleed valve on a 2.2 liter Chevy Ecotec engine is located on the slave cylinder. To find the slave cylinder remove the battery, as it is mounted underneath the battery tray.
the slave could be holding pressure, try and open the bleeder valve and connect the line.
To bleed a clutch on a Nissan Stanza, you need to find the bleed-off valve, usually somewhere near the slave cylinder.