It's right on the front of the transaxle, down near the bottom of the case; it will have a large wiring connector plugged into it from the top with a bolt in the middle. Google "A604 soleniod pack" - this is a common issue with this transaxle, and there are a lot of good pictures and step-by-step "How-To"s online.
The solenoid pack is activated by the transmission computer to control fluid flow in the transmission. That is how the correct gears are selected.
A 1996 Chrysler Town and Country does not have a kill switch.
There is no valet mode on a 1996 Chrysler Town and Country.
on the starter
The fuel injectors are self bleeding on a 1996 Chrysler Town and Country.
how to reset the antitheft alarm system in a 1996 Chrysler town&country lxi
A 1996 Chrysler Town and Country has two oxygen sensors. They are screwed into the exhaust on the rear of the engine.
The oxygen sensors on a 1996 Chrysler Town and Country are screwed into the exhaust system behind the engine.
The spark plug gap on a 1996 Chrysler Town and Country is .050 inch.
No.
A 1996 Chrysler Town and Country does not have a speedometer or odometer cable. That signal comes from the transmission output speed sensor.
The starter solenoid is on the starter. The transmission solenoid pack is on the front of the transmission case below the cooler hoses.