look by passenger front tire,by the oil filter,take tire off to get to it better,2 bolts hold it on.,disconnect positive battery cable from starter and other wire,thats it,good luck.
follow the positive battery cable to the starter.
under the passenger seat
No, they are totally different.
Remove starter and bring to auto parts store for testing
no
on the firewall on the bottom of the truck on the right side there's a black hose that it comes from.
check the starter
86-97 are compatible with same (2wd must be from 2wd, 4x4 must be from 4x4 and 6 cyl must be from 6 cyl)
First remove the negative battery cable from battery. Then get under truck and remove the wires from the starter solenoid, making sure to mark them to which terminal each goes to. Then remove the two bolts holding the starter and then lift out the starter and solenoid. That is how hard it is.
5/8 inch socket will fit the bolt and nut that hold the starter on.
If the wire is loose at a connection, find a wrench that will fit it and tighten it.
On The passenger side of the motor between the Firewall and the Throttle body