There is only 2 tensioner pulley on a Dodge Shadow 2.5L and that's right above the belt that drives the water pump and alternator... that tensioner pulley opperates the AC Compresser and the other one goes for the timing belt.
You can relieve the tension on your 1994 Mitsubishi Gallant belt by loosening the tensioner pulley. The tensioner pulley can be loosened by turning the retaining bolt to the left.
what is the diagram of a serpentine belt for a dodge shadow 1994
I assume you mean the idler pulley on your timing assembly, if this is the case then the belt is too tight loosen tensioner pulley. if you mean the automatic tensioner pulley for your alternator and A/C and the like, the you probably need a new tensioner] Good Luck
Begin by loosening the tensioner pulley. Slide the tensioner pulley to the right. The power steering belt will become loose and can be removed. Put the new power steering belt on and tighten it by sliding the tensioner pulley to the left.
The Dodge Shadow stopped production in 1994
where are the timing marks on a 94 2.5 dodge shadow es
Noisy and chirpping soundS on a 1994 Crysler Lebaron could be as a result of the tensioner pulley and can be replaced by replacing the belt.
Put a ratchet on the tensioner pulley bolt... set your ratchet on "loosen" turn the tensioner pulley and assembly upword... hold it there and remove the belt... DO NOT LET GO OF THE RATCHET AFTER YOU REMOVE THE BELT slowly let the tensioner pulley move back to a resting position...
NO!!
No
ecm
yes