GM thermostats on V8 engines are quite easy to find. Follow the top radiator hose back to the engine. That hose connects to a housing and the housing bolts to the engine. Remove the hose then remove the housing and the thermostat should be RIGHT THERE. Before putting the housing back in place make sure the intake manifold and thermostat housing are both thoroughly cleaned before you put the gasket and thermostat back in place.
Follow the upper radiator hose back to the engine, it is connected to the thermostat housing on the engine. The thermostat is located under the thermostat housing.
You did not mention the engine size. Regardless, it is in the thermostat housing on the intake manifold.
It is attached to the fan.
Open the hood, locate upper radiator hose, follow the upper radiator hose from the radiator to the "gooseneck" located on the engine, the thermostat is located under the "gooseneck". The "gooseneck" has to be removed to replace thermostat.
Follow the top radiator hose down to the water outlet on the engine. The stat is in there.
on the evaporator / dryer
it on the fire wall
Bottom of the motor, passenger side.
How do you set the timing on a 2000 Chevy blazer (V6)
Yes. I own a 2000 Chevy Blazer.
where is the fuel pump inertia switch located on a 2000 blazer
The thermostat is located on the engine of a 6.0 vortex 2000 Chevrolet Silverado 2500. The thermostat can be found by following the upper radiator hose directly to the thermostat.