Want this question answered?
It is a triple rotor Rotary engine. A b2000 was there pickup.
What it usually turns out to be is a faulty turn signal relay. In more rare instances, there is a short in the turn signal switch in the column. The column switch has tail, brake, and blinker lights wired into it. Good luck
The 1986 Mazda B2000 pickup truck has 14"x5.5" rims. The OE tire size is 205/75R14, and 195R14 tires also fit ideally.
2 bolts hold it on
It is behind the timing case cover behind the crankshaft pulley.You have to remove the timing belt to replace the water pump for this repair.
205 75 14
Also,do you adjust them warm or cold?
Clutch safety switch =- should be on the top of the clutch pedal under dash area Neutral safety switch could be at the lower end of the gearshift handle or at the side of the transmission
No, it is carburated. If you remove the air cleaner cover it will have a opening with a flap inside it.
Yes, a Mazda B2000 is most definitely a 4-cylinder with a 2.0L engine. However, technically Mazda didn't produce the B2000 as a 1988 model. It was made in 1986-1987. Then in 1989 Mazda made the B2200 Pickup, which is a 2.2L 4 cylinder.
There are none...i have an 87, short cab and there are no drain holes.
It is a Radiator Fan Switch - You can purchase it at Advanced Auto for about $35 but they have to order it It is a Radiator Fan Switch - You can purchase it at Advanced Auto for about $35 but they have to order it It is a Radiator Fan Switch - You can purchase it at Advanced Auto for about $35 but they have to order it