its located behind one of the pulleys that is driven by the belt. usually the top/ front one that has 4 bolts holding it on. loosen the bolts brfore removing the belt. (this helps make it easier). 2nd remove the belt by removing tension from the belt tensioner. 3rd finish removing the 4 bolts you already loosened and remove the pulley. 4th, the water pump is held on by 5 10mm bolts remove those and install the new part reversing this procedure.
whats the eigine size
Water pump removal chevy monte carlo 3.8
Follow the top radiator hose down to the water outlet on the engine. It is in the water outlet.
Ebay..!!
Remove the water supply hose from the top of your 2003 Chevy Monte Carlo thermostat housing. Remove the thermostat housing retaining bolts. Lift the old thermostat out. Drop the new thermostat in and reverse the process.
water pump is located right front corner just across from coolant tank.fwd of power steering pump next pulley over.
In a 1997 Monte Carlo Z34 you will require 1 and 3/8 gallons of antifreeze. ?æThis is to be mixed with an equal measurement of distilled water.
Very likely
Blown head gasket.
bad door seals
http://www.youtube.com/watch?v=n0u5uOC_YIo This is good
Your cabin filter seal is missing or out of place.