As of July 2013, there are several stores where a person can buy a wiring harness for the hazard signal switch for a 1977 Mercedes 450 SLC. Some of the names of the stores are Auto Zone, Advance Auto Parts, and O'Reilly Auto Parts.
The signal lights on a 95 Mercedes e420 is changed by removing the retaining screws and pulling the light away from the vehicle. The bulb can then be disconnected from the wiring harness, unscrewed from the housing, and a new bulb put in place.
Your problem very well could be the hazard switch. i have a 1994 honda civic too i found whenever i disconnected the hazard switch from the wiring harness my turn signals brake lights and of course hazards do not work. Maybe replace the hazard switch..
behind the hazard button, its built as complete assembly for Turn/hazard signal
bad fuse or hazard switch
the hazard and turn signal are both in the same relay
Turn signal bulbs and hazard bulbs are the same bulb. When the turn signal is turned on, the indicator light on the dash flashes in tune with the turn signal. When the hazard lights are turned on, an extra fuse which is live, powers the hazard flashers, even if the car is turned off.
The fuse for hazard and signal lights on the Nissan Serena is in the fuse box, bottom row. The flasher fuse for hazard and signal lights is located in the dash just to the left of the radio.
most audis have the turn signal flasher relay combined with the hazard pushbutton switch in the dashboard. You can pull the hazard switch out of the dash by gently prying it (it's held in by friction, no screws), disconnecting the wiring harness and replacing with a new part.
It's the turn signal indicator-located behind the hazard lights.You have to take it out and replace it.
The 2004 Ford Ranger pickup truck signal hazard flasher unit can be found beneath the drivers side dashboard. The signal hazard flasher unit will be above the brake pedal.
The oxygen sensor is connected by a wiring harness. The wiring harness contains the signal wire. The signal wire goes to the system computer.
turn signal switch is the hazard button! Pull out hazard button and replace it! good luck!