0
Any ethernet cable will work. I suggest monoprice.com for cheap cables, but retailers like Bestbuy, or newegg.com might have one.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you connect an Ethernet dsl cable to the back of your modem if the phone line port is smaller than the Ethernet dsl cable?
You don't - you'll need an Ethernet card for your computer. A regular voice/fax modem is different than a high-speed/network connection, so you need a different 'card' (with a socket that will match your cable). If you can't find a socket that your Ethernet cable fits, then you don't have an Ethernet card installed!
How do you get PS3 online?
First you make a network connection for the PS3 you must already have a Internet Service Provider from DSL or Cable Broadband Internet and the hardware and devices needed for either a WiFi or Ethernet connection. For many people with a PC already connected that means purchasing a router and connecting it to your cable or DSL modem. On the PS3 you go to settings>network setting. With an ethernet cable from a router it will search and find your connection, then if you do not have an ethernet cable it will seek out the strongest WiFi signal.How do I connect the PlayStation 3 computer entertainment system to the Internet? has been added as a related link and it is to the Playstation Network Support
How to Connect an Ethernet Cable for High Speed Internet?
An Ethernet cable is a type of computer equipment that resembles a data cable or phone line. Ethernet cables are typically plugged into the back of a modem or router to obtain a high speed DSL or cable Internet connection. These cables can also be used to connect Local Area Networks (LANs) to access and share separate devices, such as printers. Follow the instructions provided below to properly install and set-up an Ethernet cable to a modem for a high speed Internet connection.VerificationVerify that your computer or laptop has an Ethernet-ready network slot or card. Examine the outside of the computer to find an Ethernet connection port that looks similar to a telephone jack, but larger. If no port is found, you will need to buy and install one. Network cards can be purchased for under $25, on average.ConnectionConnect one end of the Ethernet cable to the Ethernet connection port located on your computer's network card. Ensure that the Ethernet cable is a CAT5 cable, as this is the type most commonly used for Internet connections. Connect the other end of the Ethernet cable to the DSL or cable modem. If you wish to use the Local Area Network, connect the opposing end of the Ethernet cable to an available Ethernet port on the router or wall jack.Set-UpIf you have a Windows-based computer, click on "Control Panel" and "Network Settings." Mac users should click on "System Preferences" in the menu bar, located under the Apple logo. Configure your computer's Internet connection so that it automatically detects Internet when the system is turned on. Settings will vary, depending on the computer system.SettingsConsult your Internet service provider for any usernames, passwords, or specific IP addresses you may need. Enter this information into the required input fields, located on the "Network Settings" page of the "Control Panel." If you are using two or more computers on one connection, you will need to grant permission for the other computer to access the Internet connection.
On a 100BASE-TX Ethernet network where will you find the transceivers?
c. in the NICs
Where will you find the transceivers on a 100base-tx Ethernet network?
In the backbone wiring
How do I connect 2 laptops?
The most common and simplest ways is with an HDMI cable. You can find them relatively cheap on the internet compared to actual stores.
How do you find a gate way on mac?
System Preferences > Network > Built-in Ethernet > Router
Where can one find a Ethernet network hub?
An ethernet network hub can be easily found at a local electronic store like Bestbuy or Future Shop. It can also be found on eBay and Amazon at great prices.
How do you connect three computers using an ethernet switch without an internet connection to play games?
For this type of connection you will need to use a *crossover* ethernet cable, not a standard patch cable. This will allow two computers to network with eachother. You can then use the network wizard (if you use windows xp or vista) and choose to create a home network. You will need to assign each computer a unique IP address so they can find eachother, as well as a unique computer name.
If you buy a PS3 do you have to have a wireless router?
You need to purchase broadband internet service and the network connection devices. The router does not have to be wireless because you can also connect with a ethernet cable from the PS3 to a router
How do you connect to laptop to Ethernet?
All you need is an ethernet input on your laptop and a ethernet cable. Run the cable from the router output to the laptop input. Most wireless routers also include ethernet outputs in the back of the router. The laptop should discover the connection
What Type of cable to connect PC to PC?
You need what is called a crossover cable. This cable is special because there are a few wires switched that allow the computer to send and receive all has to do with the network card and how communcation is done. Answer: Correct - The wires within each terminal end of the cables are switched So the Transmit pin connection on one end of the cable is the Receive pin on the other. It's where the term crossover came from. Typically crossover cables are yellow, and can usually be bought at any computer store.
