There should be slots in the frame rails
you need to have a towbar and a Jeep Liberty
Only with the rear driveshaft removed.
You have to remove the driveshaft to flat tow a 2wd Jeep.You have to remove the driveshaft to flat tow a 2wd Jeep.
The liberty is capable to towing up to 5,000lbs when properly equipped
2002 Jeep Liberty 2WD Standard can be towed in neutral. 2002 Jeep Liberty 2WD Automatic cannot be towed. 2002 Jeep Liberty 4WD Standard & Automatic can be towed by placing transfer case in neutral and removing a fuse from the fuse block (ignition fuse). The 2WD Automatic must have the driveshaft disconnected or you must use a tow dolly or car trailer.
The 2012 with a 3.7L has a rating of 5000 pounds.
a car can be hooked up to any tow truck using a chain. the chain will pull the car up onto te a flatbed tow truck. or can be hooked up to a regular tow truck hook
Anywhere BUT the control arm. I did that and it ruined my car.
How much a tow truck can tow depends on the kind of tow truck or tow truck chassis is used. A few examples of types of tow trucks are boom, hook and chain, wheel lift, flatbed, and integrated.
You will need to remove the drive shaft to tow a Jeep with a tow dolly.
buy the wiring kit from parts store then just plug it in
Yes, put trans in park And transfer case in neutral.