Question has been answered: Diagram and fuse is located behind inside drivers side coin holder.
Under the dash u need to pull it down to open the whole dash of emergency light and cigs lighter dash Once its open you can unscrew the back of the lighter socket
The fuse that controls this is the same as the cigarette lighter fuse (15 Amp)
how to remove lighter socket from 2013 dodge durango console
You do not need to remove the console to change the lighter connector. Twist the lighter base counter clockwise and it will pop out. Unplug it from the electrical connector and replace it.
the fuse labeled as horn controls the cigarrette lighter
The 2002 Mitsubishi cigarette lighter is held in place with a retaining ring. Remove the retaining ring. Pull the cigarette lighter out. Remove the wiring harness from the end of the cigarette lighter. Reverse the process to install the new cigarette lighter.
Lighter in ThunderbirdThe lighter should be in the center console.. Open the console arm rest and remove two screws that are located under the arm rest that hold the back part of the console.Then lift up on the console and pull it forward and then it should lift up past the gear shift.. after that.. unplug the plug under the console the goes to the lighter and the illumination bulb.. this will let you take the entire console out for easy access.. The rest is a piece of cake..
The fuse box #9 is for the lighter in the console and dash.
The fuse is ok but the lighter won't work.
Fuse #3 is for the cigarettes lighter
in the fuse box
use the cigarette lighter as as a socket