http://www.corobcutters.com
I have contacted them and confirmed that their cutters fit the Craftsman molding head cutter.
You can also find cutters sold, with or without the molding head, in places like eBay and Craigslist. Google helps find them.
put a towl on its head and call it osama
Craftsman,Stanley et cetera they all make a full range of Philips head drivers.
they weren't made anywhere. they were rags with holes cut in them for the head and arms.
OHV stands for over head valve. It's not a brand name.
If you're speaking of the battery covers, there are 2 Phillips screws that come out from underneath.
As a milling machine uses round cutters, misalignment of the head would leave the base of a key way or a machined surface concave.
at the beginning of the level you would of taken photos of different animals, the wire cutters were where the rhino was. if you go to the penguins (who tell you to get the wire cutters) then head towards the water, there is an elephant on the left and an arrow on the right, turn right at the arrow. you will now see another arrow to tell you to go right again, but instead, look just before the arrow in the grass and you should see a red thing.......that's it. good luck.
A brazing torch is used to head up metals to a high temperature. This is helpful for welding, molding and construction which uses metals. It can be hand held for a torch.
Use a bolt out the same as an easy out but for bolts & nuts. Craftsman sells a set for about $20.00
what do you mean remove??. If you want to do so, then I guess start by taking off the molding around the unit (this should be held in by clips) by using a PLASTIC flat head screwdriver (in order not to break the molding). Then continue on by removing the screws that hold your stereo (is it oem?), remove stereo . If you need more help then comment.
Kohler manufactures several unique and distinctive shower fittings and heads. The rainforest shower head was first developed and produced by Kohler and has since been copied by various other manufactures due to its arcing water spray pattern which would envelope the user.
Install a lock washer between the head of the bolt and the flat washer that rests against the blade.