0
Why a Mazda MPV doesn't work anymore after remove the fuel pump and clean it?
Wiki User
∙ 11y ago
First off if you went to the trouble to remove the fuel pump you should have just replaced it with a new one. Hopefully you replaced the fuel filter. If not install a new one. You cannot clean a fuel filter. You need to make sure the fuel pump is actually working. Have someone open the fuel filler door and remove the fuel cap and listen at that location. Turn the ignition key on but do not start the vehicle. You should hear the pump run for a few seconds and then shut down. If you do not, check the fuse and fuel pump relay. If you do hear it run that does not necessarily mean it is actually pumping fuel. The only way to know for sure is to run a fuel pressure test at the fuel rail. You will need a fuel pressure gauge in order to verify this. If you do not hear the fuel pump run then either the fuse is blown, relay is defective, or the wiring to the pump is either loose, corroded, or disconnected. Any decent mechanic can solve this problem.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Will orangr juice clean weed out of your system?
it doesnt remove cannabis from your system completey but it neutralizes the effects on your body
How do you clean the egr valve in a 2003 Mazda protege?
Remove the intake tube and you'll see it under the throttle body. Its a pain to get to the two bolts holding it, you will have to feel your way around to get to the bolts. Unbolt it and remove it, when you remove it clean it with carb cleaner or brake cleaner and let it dry completely.
How do you change transmission fluid and filter in a 1992 Mazda lx?
first you remove the tranny pan and you clean it out good with a clean rag then you take the too bolts loose on the filter that is hanging down you cant miss this remove the filter and reverse process for install
Does oil clean dimes?
no it doesnt
93 Mazda Miata drivers side electric window goes down but not up what could be wrong?
The two way switch in your console is dirty. Remove it, disassemble, clean the contacts and reinstall.
How do you remove the bolt from the action to clean the Browning Sweet Sixteen?
It doesnt have a bolt, but what is called the Breech Block. You don't remove the Breech Block for cleaning. It would require a complete dissasembly of the receiver which is only recommended for a professional gunsmith. To clean, remove the barrel from the receiver by unscrewing the magazine cap. Clean the receiver with a light solvent and wipe clean, then apply a small amount of gun oil where the groves hold the moving barrel slides. To get gunk out of smaller areas, try a pipe cleaner.
How do I clean chocolate fountains that were used during a party?
The most effective way that i found to clean a chocolate fountain is just to get all of the excess chocolate out. Then run warm water through it until the chocolate doesnt appear anymore. Then reapeat with soapy water, then once more with regular water to rinse.
Why do you bath a baby?
to keep it clean so it doesnt get infcted
How do you melt a penny in coke?
it doesnt melt, but it gets very clean!
What is the conclusion for how to clean a penny with pop?
It doesnt work very well.
What is file clean up?
file clean up is the removal of the files that are not in use anymore or that are messed up and can't be used.
What if your tampon splits inside and the other doesnt come out?
If your tampon tears - which rarely happens - then all you need to do is insert your fingers vaginally to remove the rest of the tampon. If it's just a small bit of tampon the vagina may clean it out itself, but otherwise you should go to your doctor to remove whatever is left if you can't remove it yourself.
