your hassard lites have a separate flaher relay change it.
first make sure hazard lights are not on.next you need to ckeck the grounds from the battery.
The flasher box in the Mazda MX3 is the plug in that controls the flashers for the turn signals and also the hazard lights. This part is located under the dash on the driver's side, just above the brake pedal area.
no they are not
Your car has two flasher relays. One for the turn signal lights and one for the hazard lights. Replace the one for the hazard lights. Any auto parts store can tell you the location and sell you a new one.
There is a short somewhere in the wiring.
A blown fuse or a damaged computer would cause the turn signals, interior lights, and door locks not to work in the Mazda 3. The fuses are located under the dash on the driver's side of the car.
u may have a defective multifunction switch
Turn signal is on the left of the steering wheel its the wand thing that sticks out of the steering column that also has your lights and high beam controls. You flick the wand thing up or down for the turn signals and back for the high beams, and the hazard flasher is in the middle of the dash above your radio should be by itself between the vents
Are you asking how to change the Hazard switch? What makes you think it is bad? They almost never go bad and I would be really surprised if it were. Have you replaced the Flasher Relay for the hazard lights.
There is a wire harness. The bulbs tend to go out.
Your dashboard lights suddenly not working is almost always your indication that your taillights are out. If the fuse for your taillights is blown and you replace it, your dash lights should be fine.
Switch is defective or out of adjustment.