because stupid, YOU GOT THE WRONG KEY Typically, the most common reason for the key to be "stuck" in the ignitions, is that the steering wheel is turned from the center position, which causes the ignition interlock feature to be "jammed". By manipulation of the steering wheel, to where there is no tension on it, will usually allow the key to be moved to a psoition to where it can be removed. Typically, the most common reason for the key to be "stuck" in the ignitions, is that the steering wheel is turned from the center position, which causes the ignition interlock feature to be "jammed". By manipulation of the steering wheel, to where there is no tension on it, will usually allow the key to be moved to a position to where it can be removed.
how to remove key stuck in ignition switch in Chevy colbalt
Well, it sounds like the chip that is in your key may have broke or got stuck on a part of the ignition. I had that problem. This happened not long after I had had to have the ignition replaced?!?
There should be a lock on the ignition a push button that you push and turn to remove the key
the tumblers in your key switch are failing replace them before long
A guy has stuck his key in your ignition
There are several things that can cause a key to get stuck in the ignition. You can try turning the steering wheel a bit to the left or right to see if that allows it to release. Also, try pushing the key in a bit more and turn it to the lock position, then try pulling it out. Don't force the key or it could break off in the ignition.
To remove a key that is stuck in the ignition on a Peugeot 406 HDI, make sure that the car is in park. Then try to remove the key. If this does not work, spray the ignition mechanism with WD-40 after pulling out the key as far as possible. Then work the key in and out until it comes out.
is it a ford? push the key in further and then turn it
Use the opportunity to replace the ignition. Key needs to be in On position for removal.
get a new lock
Put it in reverse.
You need 2016 batteries