Want this question answered?
put in the key turn it right and pull out :) !
The door does not lock with the "door lock" button from the inside to prevent locking your key inside of the car. Simply turn the key in the door when you close it to lock all the doors.
To program a key fob for a 2009 Chevy Malibu, sit in the driver's side front will all the doors closed. Hold down the unlock button for the doors, then insert the key into ignition and turn to on. Release the door lock. Then press the key fob unlock and lock buttons, alternating between the two buttons for about 10 seconds. Turn the ignition to run when the door unlocks automatically.
If your having trouble locking your doors with the infrared key then you can look all the doors by the trunck. Just simply insert key and turn to the right to lock or turn to the left to open.
Either use the key fob to lock and unlock the doors or use the key to turn the ignition.
Close all the doors then use your key, keying through the door key hole to turn lock then turn to unlock all the doors.
Typically, when you turn the key once in the driver's door, it unlocks the driver's door. If you turn the key twice, it unlocks all the doors.
Take your key and stick it into the lock on the door and turn.
Get in car and shut the door turn key to position 2 you can see the marks near the ignition switch turn off radio so you can hear push the button to lock the doors hold till you hear a click noise, about 5-10 seconds after the doors lock turn ignition key to off position and remove key This setting should lock all doors at 9mph and unlock driver door when put into park.
put the key in the ignition switch. turn it off/on off/on until you hear the doors lock or unlock. then hit the lock button on the key(s) or transmitter(s).
key does notopen or lock doors on a Nissan maxima 1994
Older Chevy's have a steering lock when the key isn't in the ignition.