Constant temperature change due to fluctuating current/amperage draws weaken the metal inside fuses over time rendering the fuse unable to handle the rated load
When hydrogen fuses into helium protons break away. During the process, energy is released.
check your fuses or it could be the break switch which is at the bottom of the break pedal.
To check the fuses on a 1999 Harley Davidson motorcycle, use a fuse puller to pull each fuse out. Look at the side of the fuse to see if there is a break in the filament inside. If there is a break in the filament the fuse is blown.
first check uour fuses in the right front floor column. then the break switch on the break peddle,
above the parking break in a blavk box
check the switch at the break peddle
Fuses are electrical components that break open when excess power is fed into it. This, in turn, helps to protect sensitive circuitry that would have been destroyed by the excess current flowing through it.
Fuses have a maximum amount of energy that can pass through them, if there is a sudden excess of energy, they break and the circuit stops. Thus preventing any further damage to our household appliances etc..
If its not the fuses and you are getting power to the lights its most likely your ground not making contact. Clean all connections and try again.
The switch is located on the driverside just past the fuses towards the break pedal.
your break switch on your break pedal.
The fuse box in is the driver side by the Emergency break pedal on its left its a black box there would be all fuses!