The hazard lights are a seprate circuit even though they share the same bulbs. I would first replace the hazard flasher; it simply plugs in. Usually the hazard flasher is located in the interior fuse panel. I hope this helps you. Mark
try a fuse or relay.
Bad hazard switch.
it dont have lights
Your car has two flasher relays. One for the turn signal lights and one for the hazard lights. Replace the one for the hazard lights. Any auto parts store can tell you the location and sell you a new one.
try the hazard warning light switch as if this fails the indicators will not operate then if not try the hazard light relay
Test if your hazard lights work. There are normally two flasher cans in most vehicles. If the hazard lights work, It is likely to be the flasher can that works the indicators is blown and in need of replacement. These will be available for under $50US from most auto parts stores.
I hate to break it to you but these are unreliable cars. (i dont know the answer though), next time, dont get a vauxhall!!
Hazard Light versus Dead BatteryNO, IF the battery is truly dead, then the hazard lights will not work.However, if there is some power left in the battery, even though the voltage may be extremely low, then the hazard lights maycontinue to work.
change the hazard switch first
It could be the indercator switch i just had the same fault on a Hyundai and it was the indercator switch
More than likely the flasher relay is bad. Replace it. I would tell you where it is but I have no idea what model car a Seat Cordoba is. Never heard of it.
94 mercury grand marque dashboard, hazard, and tail lights do not work?