Want this question answered?
Depends on size of wrench.
yes
You use a 16 mm or 5/8 wrench.
That's correct. This particular wrench holds the nut or bolt head better than any other wrench.
If you are referring to the type of wrench that usually has an open end to tighten the bolt or nut and a point on the other end...the point is called a "drift pin" and is used to line up the hole that the bolt is going into. That style of wrench is called a "drift pin wrench".
Fitted tightly to a bolt and rotating clockwise to tighten.
If there is a slot or you can make one with a hacksaw: a screwdriver Lock a pair of nuts on the exposed threads and use an appropriate wrench to unscrew the bolt (use the wrench on the bottom nut)
Use a 14mm wrench to unscrew the bolt at the bottom of the oil pan.
Remove the drain bolt from the oil pan, and let the oil drain into a bucket. Unscrew the oil filter with the use of a filter wrench. Screw the new filter on, and reinstall the oil bolt.
unscrew the 2 screws that hold the distributor cap on,put aside,then,get a10 mm wrench,remove bolt holding rotor on,then put on and put bolt back on and tighten.
That refers to the size wrench necessary to tighten or loosen the bolt.
Alloy wheels are typically fitted with standard Hex head bolt in the majority of cases, but with one bolt hole containing a specific "locked" wheel bolt. This bolt will usually require a special adapter for your wrench to remove. This should be supplied with the wheel/car/bolts when purchased.
because the bolt is tight with an adjustable wrench and usually an adjustable wrench isn't strong enough so I would use a socket wrench but if the socket wrench doesn't get the nut loose for you then try a skateboard key (skate tool) to loosen the nut but if that doesn't work I don't know what to tell you other then to visit a skatepark because they will explain why the nut wont come off
A wrench is a tool used to turn a bolt or nut.
Depends on size of wrench.
yes
Adjustable wrench