it might be because the brake pad is rubbing along something near it. Take off the wheel and see if the cylinder is really close to anything or if u see any major scratches's.
Assuming they are Drum brakes most likely the wheel cylinder is bad.
Your brake calipers have pistons that can after years of driving and not properly flushing the brake system become frozen. You may also want to replace the brake hoses at the same time as they can sometimes produce locked brakes as well.
Slam on your brakes. If your brakes lock up, then you do not have ABS. If your brakes do not lock up and you hear a knocking type of noise from your brakes, then you have ABS.
If it is an older car without ABS the brakes would lock up and the car would slide/push/unable to steer, unless you got on/off the brakes. With ABS the computer would pulse the brakes and would prevent lock up so you would be able to steer.
Most likely you do not have anti-lock brakes in your vehicle. Other possible answer is that your anti-lock brakes are malfunctioning. If you have anti-lock brakes you should see a mechanic as soon as possible.
The Anti-Lock brakes pulsate so the brakes do not lock up (anti) and cause the vehicle to side out.
yeah sometimes my breaks lock up too when I try to stop too fast, perhaps you should break sooner and this will help
There are a couple of things that can cause your Pontiac antilock brakes to lock up. The most common cause is a malfunctioning ABS sensor.
The dealer will know how to access the codes for the brakes. When that is fixed it should not lock up then.
It is possible for the brakes to lock up on a 2000 Chevy Venture when in reverse because the brakes are not working properly. Perhaps the brake pads need to be changed.
remain calm and continue driving in the same lane. Begin to apply the manual emergency brake with your hand, lightly at first to determine the strength. You dont want to lock up the brakes, so apply the emergency brakes in spurts and make your way to the side of the road.
The problem will be your brake master cylinder. It is sticking. Get it reconditioned or get a new one fitted.