0
replace flasher unit located under dash driver side about thirty dollars for flasher easy unplug plug!
A2. Another possible cause is that most vehicles rely on the return path for the lights to be through the metal of the car chassis. Rust can interfere with the earthing contact.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Will the brake lights and turn signal work if a 2006 Chevrolet Cobalt engine is not running?
The only thing that will work with key OFF is the brake lights,head lights and emergency flashers. Dome light will also work.
Why do my rear emergency flashers and brake lights not work. Front emergency flasher work.?
Start by checkin all fuses and then go through all your wirein to rear lights and the check build recepticals for wear and corosion..
1998 Chev Lumina your rear lower brake lights do not work The upper rear brake light works If you push the emergency flashers the lower brake lights start to work againWhat can be the problem you were?
It's the turn signal switch which is the culprit.
99 Chevy lumina and your two brake lights don't work but the middle one does what could be the problem?
TRY TURNING THE EMERGENCY FLASHERS ON AND OFF A COUPLE TIMES THEN CHECK YOUR BRAKE LIGHTS. WORKED FOR ME.
Why does the emergency lights work and the blinkers don't on a 1991 mustang?
this car may have separate flashers for the turn signals and the emergency flashers
Why would the brake lights tail lights and turn signals not work on your 1985 Volvo 240 if emergency flashers are operational and fuses and bulbs are good?
I am having the same trouble. My brake lights work with the light switch for nighttime driving, but only far right brake light works when i pres brake pedal. Reverse lights dont work at all. Turn signals and hazard light work.
Why don't the brake lights work but the flashers and running lights work if the bulbs and fuses are good?
Please check the Brake light switch....The brake light switch should be located near or on the brake pedal (up on the stem of the brake pedal)
Why did my headlights taillights and dash lights stopped working when flashers brake and turn signals work fine what happened?
in dash lights
Why don't the brake lights work when tail lights turn signals emergency flashers and 3rd brake light do on my 1996 Chevy Monte Carlo?
First thing I'd check would be the fuse for the stop lights. If it is okay the next thing I'd check would be the stoplight switch located under the dash where the brake pedal is suspended.
Why might the brake lights and emergency flashers not work on a 1999 Chevy Suburban if all bulbs and fuses and the flasher relay are ok?
The turn signal switch in the colum could be bad COULD B the TurnSignal switch OR the Flasher 4 the Emergency FLASHERS (because there is 2(two) Flashers & the Brake light Switch on the Brake pedal could B Bad.(turnsignals Have there OWN Flasher) the emergency flasher switch has 3 electrical contacts.sometimes they overheat and melt into the red flasher switch deforming the whole switch.unfortunatly the whole blinker and flasher needs to be replaced.
If the Brake lights and Emergency Flashers work but not the turn signal on a 77 Ford F-150 4x4?
check the turn signal relay in the steering colum, just before the turn signal switch the plastic receptors may be broke.
Hazard lights out on 1992 GMC Sierra Signals work brake lights work could it be a relay If not what else?
Fuse or 4 way flasher unit there are 2 flashers on for turns one for 4 ways
