It's because you need to change the light bulbs on your car.
I have changed the driver's side bulb and checked all of the fuses,now the passenger side stays on hibeam only, nothing seems to work. And now the truck will not enguage into gear at all? any advice?
The switch is not a switch. It is a light for the ashtray itself. It will only be on when the car has the headlights or running lights on.
that switch does not exist. It simply is activated when you spray your windshield washer fluid onto the windshield. Your headlight switch has to be on. I know your lights are always on, however the wipers for your headlights will only activated if the headlight switch is in the on position.
You have a problem with your multifunction switch, probably the only way to fix it is to replace the switch.
The switch that turns the headlights on. PULL it back once for front fogs(if fitted) and twice for rear fogs. This will only work with the headlights on though(sidelights or dipped) OK
only the headlights are suppose to flash on a headlight flasher
You've got a bad headlight switch and need to replace it, that's the switch you pull in the dash to turn the lights on. That's why the headlights only work on bright but not dim.
The dimmer switch is adjustable. Take bolts out that support steering collum. Loosen screws that hold switch and slide it whichever way it needs to go to work.
Low beams are not working and high beams are. If both low beams out, probably not burnt out bulbs and probably is fuse or a switch problem. Could be the bulbs but doubtful. See the Sources and Related Links section below for light bulb info.
replace your head light switch
You can,t switch between high and low beam in DRL mode. Only when you turn on the headlights with the HL switch.
Have you looked for the fuseable link down by the starter? Check the switch, it may be the culprit. check the headlight relay