Usually it is related to fuel since the engine consumes more when worked(under load.)
Depending on the model, 3600 - 4000 rpm top no load speed.
Top no-load speed is 3050 rpm.
Why power generated with under frequency is harmful to the load?Read more: Why_power_generated_with_under_frequency_is_harmful_to_the_load
Other than removing and cleaning/replacing the spark plug and air filter, try opening the carburetor needle valve about 1/8 turn for a slightly richer mixture (rotate counter-clockwise to open).
The 'type' of power is determined by the load. If the load is resistive (e.g. a lamp) then the rate at which it consumes energy is termed 'true power', expressed in watts.You seem to be under the impression that reactive power is 'pushed out' into a load. This is quite false; the loaddetermines the power.
Assuming the generator converts 90% of the mechanical power into electrical power, it has an efficiency of 90%, which means it consumes 11 kW of mechanical power under a full electrical load of 10 kW. Under no load the frictional losses will still apply, but the resistive losses in the windings will not be present. Therefore the no-load losses can be estimated as 500 watts in this conditon.
No, the transformer has to supply the load, whether it is light or heavy.
Apparent power is VA. Real power is W reactive power is VAR. Under an inductive+resistive load the VA is higher than W
Load refers to the power required to accomplish a task. In electricity a device's load fluctuates depending on what it is doing. If it is starting an application it is under a bigger load than if it is just on standby.
Engine Position Sensor.
The main piece of information needed is the load wattage or amperage that will be connected to the power supply. Once this is known the power supply of a greater size that the load should be chosen. Also with this information the size of the wires can be calculated from the power supply to the load. Too small a wire will create a voltage drop at the load end of the circuit. This will cause under performance of the load.
A small industrial vehicle with a power-operated pronged platform that can be raised and lowered for insertion under a load to be lifted and moved.