Screws are a more secure fastening than nails because the only barrier to removing a nail is the friction of the sides of the nail against the wood, so it can be pulled loose by a simple torsion force. A screw, however, has threads, so a torsion force cannot remove a screw without destroying part of the wood in the process.
A screw holds wood together better than a nail because the threading of a screw provides a horizontal grip on the wood. Nails are driven down into wood and have nothing but the pressure of the wood to keep them attached, which means it is easier to pull a nail straight out of a board than a screw.
A screw holds wood together better than any nail because it resists being pulled out much better. A screw is also easier to remove without damage. However, screws are more expensive to make and take longer to put in, so nails are still used in a lot of timber work.
A wood screw will have a courser type thread and will have a sharper point.
They hold very well, better than into wood.
to screw to pieces of wood together>.<
Screws have things called threads and when you twist them into something, they get stuck inside. They work best with wood. Answer The thread on a screw allows it to PULL itself into say a piece of wood. No pressure is needed on the screw driver, just to turn it will be sufficient. The screw does all the work.
A screw holds wood together better than a nail because the threading of a screw provides a horizontal grip on the wood. Nails are driven down into wood and have nothing but the pressure of the wood to keep them attached, which means it is easier to pull a nail straight out of a board than a screw.
A screw holds wood together better than any nail because it resists being pulled out much better. A screw is also easier to remove without damage. However, screws are more expensive to make and take longer to put in, so nails are still used in a lot of timber work.
It holds things together like wood, while a nail would not work as good as a screw because, a nail might fall out.
don't know what you mean by step by step process, but I can say with confidence that a screw will almost always hold better.
A wood screw will have a courser type thread and will have a sharper point.
They hold very well, better than into wood.
to screw to pieces of wood together>.<
A screw has an irregular shape, and has more to stop it from falling out. Also, A screw has an advantage because it's drilled in and the spirals makes it stick in faster and doesn't take long as a nail to hammer it.So, it takes a few seconds to screw the screw in.
because with a screw you have much more area gripping the wood and cannot under normal circumstances pull it out without shredding the wood where a nail has much less area in contact with the wood and being held in by friction only can be simply pulled out without tearing or shredding the wood.
Just exactly the same way you screw into wood.
You need to find out the size of drill bit you need - put the screw into a screw-bit rack and (going from the smallest to largest), the first one it fits in will be the right bitThen rill the hole, using a scrap piece of material (if appropriate)Then countersink the holeFinally, fitHope this helped, I've got to do this for DT homework