Want this question answered?
heater switch needs replaced
Heater core (radiator) needs to be cleaned or changed
You need to back flush the heater core have had to do it to my jimmy 2 times and fixed the problem is easy fix .
They're separate blower systems. Have you checked the fuse?
You may be low on coolant. You may have the wrong temperature thermostat in it.
The heater control valve is stuck open.
Possibly low coolant level or blown heater core.....also check thermostat CHECK COOLANT LEVEL FIRST. IF FULL THEN MOST LIKLY YOU NEED A THERMOSTAT.
most likely you dont have enough coolant to reach heater core. make sure your full
If water is only drawn from the cold faucet, then no, the water heater is not involved. However, if water is drawn from the hot faucet- even for a few seconds- hot water IS withdrawn from the heater, and fresh cold water drawn in to be heated- even if the hot water did not make it all the way through the pipe to the faucet- and the water heater will work to heat that fresh cold water.
cool hello
The engine needs to be hot in order for you to get got air. On a cold morning, even if you let your truck run for a while, will not get hot enough to blow hot air usually until you drive it for a little bit. When it gets at or near operating temperature there is no reason that it shouldn't blow hot air.
Simple, you ac does not blow cold air even though you have it turned on and the temperature set to cold.