Why does my flywheel keep bending..
A flywheel is on the outside of the motor, typically has fins on it, it is weighted to keep the inertia of the motor spinning to help crank the motor over
when you have a clutch put in you also have to replace or remove the flywheel and have it refaced to keep from messing up the new clutch, and yes the flywheel is suspose to turn when the engine is turning, so if the flywheel wasnt replaced or refaced then i would say that the flywheel is what the problem is
why does my ps3 laser keep breaking this is the second laser not including the first.
all you have to do is keep it there and not to touch it.
there are several things that keep the engine. some key ones are fuel, electrical (ignition), and compression. but the most important one of all is the flywheel. flywheel is chief.
Pulling the engine's start cord turns the flywheel. The flywheel has a magnet or magnets on it that create electrical charge as the flywheel turns, causing them to pass other magnets. The electrical charge travels to the spark plug and starts the engine. Once the engine is running, the inertia created by the flywheel's turning has enough momentum to keep the engine's crankshaft turning between the piston's power strokes. During operation, the flywheel's magnets also induce voltage in the armature to keep the spark plug firing. Those magnets are called a Magneto ignition.
To keep the oil in the base and not out in the flywheel area and on the ground.
It is a yes and no question because you can keep breaking it down but eventually it will melt.
how can you keep an egg from breaking if it is dropped
To keep balance and keep it from breaking
By not breaking it
By not getting into fights