The common reason why is a fuse blew.
Well if your turn signals still work its not a short. I just fixed a pinched wire on my 96 and now my turn signals dont work. But according to a buddy of mine on Clubintegra.com there is a chance the fuse for the hazards is blown.
It could be the turn signal bulbs, some vehicles use separate bulbs for the hazard and turn signals. It could also be a bad switch or wires for the turn signals.
if your turn signals dont work but your hazards do...check the fuse behind the radio.it looks like your hazard flasher.(should be blue, mine was).if not, make sure that the wires are fully seated in the ignition module on your steering column(its right below the ignition, that you put your key in)..if there loose, get a zip tie and secure it on the ignition module..
How to change hazard and horn reminder modeWhen LOCK and UNLOCK signals are sent from the remote controller for more than 2 seconds at the same time pressing both buttons, the hazard and horn reminder mode is changed and hazard warning lamp flashes and horn sounds.
no it dont
hazard switch dont lights on
I dont know
i dont no answer
I have a Mustang 1965, but I dont have the original invoice is easy to find the original dealer in order to get a copy of the invoice
horses dont migrate doy
If neither side works, the Flasher Relay is defective. Replace it.If neither side works, the Flasher Relay is defective. Replace it.
The hazard and turn signals each have their own flasher relay. They should be fairly close to each other under the dash. They are the same flasher part.