Want this question answered?
it has only very litle tension resistance.
Actually ACB isused for Low Tension side and VCB is used for High Tension Side..Chappa matter
There are different forces on a materials such as Compression and Tension. Compression is pushing a material together. Tension is pulling a material apart. Concrete has good strength in Compression, but is weak in Tension. The steel reinforcement improves the resistance to tension of the concrete.
No a integrated circuit IC for short is solid state and can only be destroyed by reverse polarity or shortened output or to high input tension or current No a integrated circuit IC for short is solid state and can only be destroyed by reverse polarity or shortened output or to high input tension or current
High-voltage conductors are circular to evenly-distribute the electric field that surrounds them in order to prevent breakdown.
Sometimes we are (high tension lines) - but it weighs too much and has too high a resistance for "normal" use.
yes.due to the surface tension ,there is liquid offer resistance.
bulk oil circuit breaker
Yes. Exercise actually relieves tension and reduces the intensity of cramps.
it has only very litle tension resistance.
There are many ways in which the resistance influences the extension cord. Tension could cause it to break for example.
engine pulls the aircraft forward but air resistance tries to hold it back results in tension which tries to stretch..............2)bracing wires are subjected to tension
The rising action is the part of a plot where the conflict builds up gradually in intensity. This is when the tension and complications in the story increase, leading to the climax.
A resistor does not only decrease current in a circuit it can also reduce tension(voltage) if connected in series.
Tension headaches are caused by tightening in the muscles of the face, neck and scalp because of stress or poor posture. They can last for days or weeks and can cause pain of varying intensity.
There are 2 different types of these devices: circuit breakers (which can be reset after the problem is fixed) and fuses (which must be replaced after the problem is fixed).
By touching an uninsulated conductor which is under electrical tension.