I own a 1994 acura integra and the heater/air conditioning blower is not working, I can not defrost my windows and the heat does not blow. What is wrong and how can the problem be fixed.
my 94 explorer wont blow heat
An air conditioner blows out heat
Radiator may be plugged or restricted and need boiling out or replacing
the heat blows out the defrost when it should blow out floor vents only
Check the colant level, it may be low.
is there heat to blow or does the blower not work chk thermostat or vacuumn at htr sw respectfully
It's because of the heat from your blow dryer.
I have a 94 acura legend ls, and its been heating up because different things. I replaced the thermastat, which is probally the cheapest problem. Always check your fluids like oil and coolaint, make sure nothing is leaking. I also got a new radiator cap because my old one didnt have any pressure and it was letting coolaint seap through the top. The more expensive problems could be you need a new water pump, or you might have a blow head gasket. Usually if its the water pump your car will heat up put if you give it gas it'll eventually cool back down, and a blown head gasket the car usually won't cool back down. Hope this helped.
it wont blow heat itll blow cold air
its 2009 you punk, why dont you buy something newer...you better of replacing yourself.
Yes you can use heat on Monofibre extensions. You can use a blow drier on a medium heat or heated rollers. You shouldn't use straighteners ,but you don't need to. If you want Monofibre to be totally straight you can blow dry it straight. You should not use a blow drier on a top heat.