0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you put a gear in a van?
push down on the clutch and move the gear stick forward and let the clutch out slowly
How do you ride a dirt bike with clutch?
hold the clutch lever in, rev the bike a little bit, then slowly release the lever until you start to move a little bit. when you want to shift, either mash the gears or i guess you could pull the clutch lever , shift into another gear, then release slowly.
How do you ride a clutch on a dirt bike?
hold the clutch lever in, rev the bike a little bit, then slowly release the lever until you start to move a little bit. when you want to shift, either mash the gears or i guess you could pull the clutch lever , shift into another gear, then release slowly.
How do you use a clutch on a dirt bike?
the first thing you do is kick start you bike. Than you pull in the clutch and click down the gear shift wth your left foot. Than you let the clutch out slowly then you off!! the gearshift- after you pull in the clutch you click down to get in gear 1 than gear two ect. to get into neutral you click down to gear 1 than you click half way uppull the clutch aND KICK START YOUR BIKE. HOLD THE CLUTCH AND SWITCH 2 1ST GEAR. GIVE THE BIKE A LITTLE GAS AND LET GO OF THE CLUTCH. THEN WHEN YOUR RPMS ARE ALL THE WAY FULL LET OF THE GAS PULL THE CLUTCH SWITCH 2 2ND GEAR THEN GIVE IT GAS THEN KEEP DOING THOSE STEPS.... MABYE SOMEDAY ALL MEET U ONE THE TRACK, lata
How do you know your dirt bike clutch is bad?
when a clutch goes bad the bike will not be able to go top speed or let the rpms get to high in any gear because the clutch is engaging when it is not the right time hope that helps
Use of clutch while driving a two wheeler?
clutch is necessary for easy driving. when we press clutch it separates gear box and engine shaft and that time bike has free moving and we can shift our gear and do easy driving......
Why you start the bike in 1st gear?
if your talking about starting the engine up, its best to crank a bike up in neutral but you can in first if you hold the clutch in if you mean riding the bike if you try to go in say fourth gear the bike is likely to stall
I have a 1984 suzuki rm250 should the bike move at all with the bike in gear not running.?
It will move for you, in fact the higher the gear the easier it will be to move. When you push the bike and begin to rotate the rear wheel with the trans in gear you are rotating the crankshaft of the engine, jumpstarting the engine for all intensive purposes.
When a KX 125 is in gear with the clutch in and stopped the bike still wants to go what should you do for this?
Your clutch needs adjusting refer to your manual if you have one.
Do you have to us clutch to change gear on stomp 120?
No you don't need to clutch there semi-automatic but clutching does no harm and it will teach you to clutch if you ever change bike. Hope this helps you :)
Do you have to use the clutch when shifting riding a dirt bike?
== At a low RPM it is recommended to use the clutch but at 3rd gear it is alright to shift UP to 4th without pulling the clutch.
5spd metro starts but will not move the engine idles and revs but when in gear it will not move the funny thing is that you can fully depress the clutch in gear and the car will not die?
Nothing funny here....bad clutch disc.
