0
Why does the 1993 Chevy ignition control module repeatedly fail?
Wiki User
∙ 14y ago
make sure everything is clean under the cap and there is no way for moisture to get in then check for good engine to body ground and make sure it is getting a full 12 volts while cranking and running good luck
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Where is the ignition control module 1997 Chevy cavalier 2.2 L?
where is the ignition control module loacted on a 1997 chevy cavalier
How do you change the ignition control module in a 1988 Chevy Silverado 5.7 L?
How do you change the ignition control module in a 1988 Chevy Silverado 5.7L
Where is the ignition control module located an a 1983 Chevy blazer?
Where is the control module located on the 1983 Chevy blazer
How do you change the Ignition Control Module in a 1995 Blazer S-10?
Remove the wiring harness from your 1995 Chevy Blazer ignition control module. Remove the ignition control module retaining screws. Reverse the process to install your new ignition control module.
Where is the ignition and distributor located on a 1990 Chevy Celebrity?
The 1990 Chevy Celebrity engine is distributorless, the ignition is handled by a combination of the engine control module(computer) and the ignition control module. You did not mention which engine the car has. If your car has the 4 cylinder engine the ignition control module is below the intake manifold at the rear of the engine. You can follow the spark plug wires to it. The coils are mounted to the ignition control module. If your car has the V6 the ignition control module is near the starter and again you can follow the spark plug wires to it. Again the coils are mounted to the ignition control module.
Where is a ignition control module a 1987 Chevy blazer s10?
The ignition module is located in the distributor, under the distributor cap.
How do you change the ignition control module in a 1989 Chevy Celebrity?
Which engine does your car have?
How do you reset time on a 87 Chevy Celebrity?
All 1987 to 1990 Chevy Celebrity engines use distributorless ignition. Timing is controlled by the engine control module in conjunction with the ignition module. There is no provision for adjustment.
Where is the ignition control module located in my 98 Chevy Venture?
under the coil pack or on the distrbutor
Where is the ignition control module locaded on a 1995 Chevy astro van?
under the distributer cap
Where is the ignition control module for 1997 Chevy Cavalier 2.4L?
The ignition control module is located under the electronic ignition control module cover. On a 1997 2.4L cavalier, it will have the words 2.4L twin cam stamped on it. It is on the top of the engine and is held in place with four bolts. This cover must be removed to get to the spark plugs.
Have a 88 Chevy Celebrity engine will not restart after hot?
I would suspect a failing ignition control module.
