Want this question answered?
If the resistor is alright why replace it.
How do you replace a fan blower resistor on a vauxal Corsa?
Changing a corsa blower resistor is easy you just have to follow a few steps. First you will have to take the wheels off, and then screw off the caliper, then after screwing off the pads you can replace the corsa blower.
where is the switch resistor on 2003 buick
The old resistor was burned out. If you burn out the new one again, replace the blower motor.
A blower resistor can be replaced, in your 2002 Oldsmobile, by removing the resistor wiring. Remove the retaining screws. Reverse the process to install the new resistor.
The blower motor speed resistor is burned out. You can replace only the resistor but the resistor probably burned out because the blower motor is going bad. If you want to fix it for good, replace both the blower motor and blower motor speed resistor.
yep
One can replace blower motor resistor on 2003 Nissan altima by removing the old using spanners and replacing it with a new one.
To replace a blower motor on the resistor first you take off the nozzle and then you go into the motor through the nozzle and unlock it then repeat and oil and done.
On the passenger side under the dashboard, first remove the fire panel and unclip the light. The resistor is towards the far back in the center. There are some screws that are kinda hard to get to, but it is possible. Unclip the wires on the old resistor and remove the screws and remove the resistor. Then place the new resistor where the old one was removed from and replace the screws, attach the wires. Now re-attach the light to the fire panel and replace the panel.
how to replace blower resister on a 325i BMW 2002