Auto Parts and Repairs
Car Batteries
Chevy Suburban
Ford F-350

Why does the dome light override switch on a 1999 Chevy Suburban drain the battery?

353637

Top Answer
User Avatar
Wiki User
2004-11-18 05:38:29
2004-11-18 05:38:29

Either the switch was left in the wrong position, or the thing is defective. The dome lights draw enough current to drain the battery overnight.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

The relay switch for the locks on a 99 Chevy Suburban is located under the driver-side dashboard.

User Avatar

Chevy did not use them on there trucks.

User Avatar

Chevy did not use an Inertia switch on there trucks.

User Avatar

Try sledgehammering the battery.

User Avatar

Chevy did not use an inertia switch. It don't have one.

User Avatar

On my 99 Suburban, the alarm activates when you press the lock button on the remote twice.

User Avatar

where is the oil pressure switch on a 1999 chevy surburban

User Avatar

There is NO TYPE of kill switch on that truck what so ever.

User Avatar

Do you mean how to tell if it is broken?

User Avatar

Not sure what you are referring to. Need more info.

User Avatar

On my 2003 Chevy suburban the wiper blades don't stop when you turn off the switch sometimes, i would appreciate any help at all

User Avatar

It is the turning signal lever. Pull it towards you.

User Avatar

Chevy did not use the Inertia switch, Only for did.

User Avatar

it is on top of the block in the rear by the distruibter

User Avatar

The 2002 Chevrolet Suburban fuel pump relay switch can be found on the frame of the vehicle. The switch will be to the right of the gas tank.

User Avatar

The 2002 Chevrolet Suburban ABS relay switch can be found on the firewall in the engine compartment. The ABS relay switch will be on the drivers side of the firewall.

User Avatar

The 1992 Chevrolet Suburban air conditioner compressor relay switch can be found in the fuse box. The air conditioning compressor relay switch will be labeled as such.

User Avatar

It is on driver side of Transmission behind the shift linkage

User Avatar

To override a neutral safety switch, locate it (it should be at the base of the steering column) and remove the green and brown wire. Connecting these two wires together will bypass the safety switch and your reverse lights will turn on.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.