burnt out tail lights
It is quite easy to install the 1992 Chevy Lumina brake light switch. The brake light switch simply plugs in and out.
Check bulbs?
Above the brake pedal. If your main brake lights dont work but your third center brake light does, then the brake light switch is not the problem. Its is the turn signal switch.
Purchase the Haynes Manual for the Lumina it has all diagrams you may need.
Usually at the upper end of the brake pedal under dash
No, it is a brake light.
brake light switch, it is typically located above the brake pedal somewhere on the brake pedal arm
7.99 at autozone you have to order it .
You can access the middle brake light from the inside of your 2000 Dodge Neon cargo compartment. Remove the brake light wiring harness. Remove the brake light retaining bolts. Reverse the process to install the new brake light.
Check if the male and female plugs are snapped into place tightly. And check if the lights or fuse is burnt out.
remove the neg wire to the battery and leave it off for 15 minutes
you need to change the multifunctional switchthis happened to mine to