Make sure hazard switch is pulled all the way out May be a problem in thw steering column
Turn signal flasher?
hazards and turn signals have separate flashers. replace flasher for turn signals
try replacing all sets of fuses for the hazard and the tail lights.
If the turn signals on a car works but the hazard lights do not there may be a problem with the flasher switch. The flasher is located in the steering column, and a damaged unit can cause the lights to stop working.
If your 1999 Ford Expedition has turn signals that do not work but hazard lights that do work, it is likely that you have a fuse that is blown. You might also have a wiring issue including exposed wiring.
When both of the turn signals (indicators) of a car blink simultaneously, it is usually because the hazard lights are turned on.
turn signals won't work. changed all the bulbs. Hazard lights work. 1999 Chrysler Sebring hardtop
Defective Flasher Relay, replace it. One relay operates the Hazard Lights and the other operates the turn signals. Be sure and replace the correct one.Defective Flasher Relay, replace it. One relay operates the Hazard Lights and the other operates the turn signals. Be sure and replace the correct one.
may have a bad signal switch,or may be a blown fuse
They use separate flasher relays. Replace the turn signal flasher relay.
There are 2 separate flashers.jd
because of a flasher switch, located in the fuse panel.