I'm not a mechanic / technician but is your engine oil level going up
I've heard that the modulator valve on the passenger side of the automatic
transmission ( behind a heat shield ) can allow the transmission fluid to be
sucked into the engine through the vacuum line if there is a problem with the
modulator valve on Ford Explorers up to the 1994 model
Through the dipstick tube
The transmission fluid for the automatic transmission is added through the automatic transmission fluid dipstick located to the passenger side of the engine near the firewall , use a funnel
You fill a tranny through the dipstick tube. You will need to buy a small funnel.
The automatic transmission fluid dipstick should be near the firewall , in the engine compartment , just on the right side ( passenger side ) of the engine The manual transmission does not have a dipstick , the fluid level is checked underneath the 1993 Ford Explorer at the fill plug on the transmission
According to my Haynes Ford Explorer repair manual : ( MERCON automatic transmission fluid is used in the transfer case of a 1993 Ford Explorer )
In through where the transmission dipstick is.
I have a 1993 Ford Explorer. There is no fill plug for transmission fluid. I imagine that the 1994 Ford Explorer would be similar. To fill, use a funnel and pour the transmission fluid directly into the tube that holds the dipstick. Do not fill past the full line on the tank below.
1993-1996 automatic transmission: MERCON automatic transmission fluid (NOT MERCON V) 1993-2005 manual transmission: MERCON automatic transmission fluid (NOT MERCON V)
How many quarts of transmission fluid is required to change transmission fluid in a 1993 150 Ford Van?
how to put transmission fluid in a 740il BMW 1993
and what type transmission fluid
How would i repair a 1993 ford explorer 4.0 liter A4LD Transmission?