0
The only thing that does is sends a signal to amp to power up and when to shut down
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Which wire is remote wire on 99 Chevy van stereo?
If you are hooking up an amp, you have to run your own remote wire or branch off the antenna power wire.
What will happen if you bridge the remote wire to the ground?
When runing the remote wire to the positive on,your amp it will stay on when the key is on or off but if you run ur remote wire to the radio fuse in ur fuse box it will cut the ampoff when key is off and with key on itll turn amp on
Where does the radio's system remote control wire run to...from the back of the stero?
It is use to turn on external amp
How do you wire an amp and sub to a c240?
Run your power, ground, and remote wires. Then connect your RCAs to the back of your CD player and your amp, then connect your speakers to the amp..-Shocker
How do you put a subwoofer in your car?
You have to run the powers and grounds for the amp, do not forget to set up the remote wire either. then you will need to connect the amp to the CD player auxillary with the RCA's, then you just wire your sub to the amp.-Shocker
How do you connect two amps to four subs?
Run a 2 sub per amp set-up. Get a distribution block for you power wire to split the power wire. You can run the remote wire from your stereo to one amp and then from the amp to the other amp. you will also need 2 sets of RCA's Easy way is too get a 4 channel amp to power 4 subs.
How do you run an amp?
well, you set up your power, remote, and ground wire. Then you need to run your RCA cables to the back of your head unit. After that, you just connect your speakers to the amp and your done.-Shocker
How do you install an amplifier?
First, Disconnect battery from vehicle, negative then positive. Run speaker inputs from the radio to the amp. Supply fused power from the +battery terminal connector to the amp. Ground the amp to the body/frame. Find a circuit to supply remote power (something that is only powered when the stereo is on... powered radio antenna works well). Run remote power wire from this powered circuit to the remote power input on the amp. Run your speaker wires from the amp to the speakers. Connect battery, positive then negative. Turn radio on. Test.
How do you hook up subwoofers in a 97 Chrysler cirrus?
first you have to run a wire from the red + terminal under the hood or in the left tire well where the battery is for a more direct connection then run rca wires from your head unit as well as a remote wire to your amp run those and the power wire to the amp and your all set
How do you hook up two car stereo amplifiers one to each sub in there own box can you run a power wire out of one amp over to the other amp?
Do you mean the main power from the battery or the remote turn on? If you mean the battery power, usually amp add on kits come with distributor blocks. You make one run of power wire from the battery to somewhere close to your amps. Then, hook that wire to the block, and run a new piece of wire from the block to each amp. If you mean the turn on lead, just make one run from the head unit to the first amp, and then run another piece from the first amp to the second.
Can you put subs in a car without a amp?
you need to run a power wire from youre battery to youre amp.then run a gound.you also need to run the remote wire from youre radio this will make youre amp turn on.then just run youre rca jacks/or speaker wires to amp.then run the outs to speakers that's it.run a power wire from the battery to the amp, put a fuse no farther than 8 inches away from when you attached the power to the battery. run another wire wire the same gage as your power line to a unpainted, sanded metal bold for your ground wire. find the remote or power antena wire coming from your desk and run a wire from that to the remote on you amp so it will turn on when your deck turns on. run RCAs from you decks line out into your amp and then normal speaker wire from the amp to you speakers you want to power. make sure you store your amp in an area in the car that stay cool so it doesn't overheat in the summerMake sure to secure the amp with whatever hardware is provided . also be sure to use the correct size power and ground wire. if it is a factory deck that u are installing the amp on your remote power will be th power antenna if eqquipped if not i would recomend installing a grounded inline remote switch it seems to eliminate ground noise u can get by tieing inti the acc on the factory deck. if u don't have rca outs .Hi-Lo converters and Line-out converters that allow you to add an aftermarket amplifier (orRCA outputs) to a factory radio.
How do you hook up a sub-woofer and amp in a 2004 Mazda 3?
if you are keeping the stock stereo you have to get a rca converter(converts speaker wires to rca) and hook them up to the rear speakers. then run rca's to the amp, then run your power wire, ground, then the remote wire you will have to tap into the fuse box and find the radio fuse that turns off with your key, once you find that just tap into it and run the wire back to the amp.
