look carefully on keyboard, do you see any special engravings?
open control panel and see what relative you can find.
many times windows key + any specific key should be able to do the job
also give a try to the dual monitor software at murgee.com which can give you lots of options to control dual monitors
Hold down the LEFT button next to the multi-function display for a couple of seconds. The display should now start flashing. Press the Left button briefly to scroll through the display options and the RIGHT button to change the currently flashing item.
screen list
OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.
Insert the ignition key, and turn it to the ACC (accessory) position. Turn off the radio. Press the display button until Oil Life shows on the radio display. Press the seek button until Tire Pressure Monitor displays. Press the 2nd preset/#2 button. Press the display button again. The tire pressure monitor should now be reset.
You need to reset the screen by pressing the button on your LCD monitor.
There's no button to turn of display, but there's a small software (85KB) that you can use and assign a key to it to turn off the display, it works perfect with me. follow the link to download it. There is usually a function button combination that will switch the LCD off and external monitor on. On an HP G6000 it is [Fn] + [F4]. Look for the monitor symbol on the F keys and press the Fn key with it.
A viewsonic tv monitor is a computer monitor that can also function as a tv even with the computer off. It works like a regular monitor that can be switched over to a tv at the press of a button.
Refer to your Owner's Manual. With the ignition in the accessory or on position and the radio off, hold the bottom buttom of the radio in for over 8 seconds. You will enter the options mode. Use the right arrow button to key over to "Tire Monitor". Press the "1" key until the display says "Reset". Press the bottom radio button and the display will read "Done". Key over to "Exit" and press the bottom radio button. The oil life monitor is reset in a similar manner.
It displays several options about what you can paste, like everything, format only, formulas only, special format, etc.
The fifth one in from the left on the top row. Actually, it does say 'F5' on it, also your keyboard my have a different button on the end or something, no guarantees it is the same as the one I am using. refresh
Enable Content
front pannel vol- + remote display button.. simultaneously after 5 sec press display again and set ur requirment and again presss display for nxt page... to set use prog,and vol button