It might be because it is old, worn and worked.
Park for automatic transmissions, and Neutral for stick shifts.
change the neutral safety switch.
when talking about a motorcycle, the traditional location for neutral is between 1st and 2nd gear. you shift all the way down to 1st while lightly moving the motorcycle back and forth. you then lightly tap the gear lever up without entering 2nd gear. vualla, your in neutral.
First you have to press the clutch all the way to the floor, then move the gear shifter whether it is on the collar or stick shift) to the middle of all the gears, then the vehicle will be in neutral.
it is not in gear
Put your foot on the clutch, move the gear stick to neutral and then put your foot on the brake pedal
The normal process for putting a manual car in neutral is to first completely depress the clutch. After the clutch is fully depressed then it is safe to shift the gear stick into neutral.
At the base of your gear shift, you will see a small flap. Stick a ball point pen into the flap about 2 inches. Press the lever you find. Then the gear will shift.
linkage is sticking
yes you have to change gear in any vehical that is a stick. you can change it to 1st gear or neutral. but on the other hand with a automatic their is no need to change gear they put a auto clutch system in vehicals like that.
why 4 wheeler has neutral gear in the center of all gears?
The neutral position is usually between first gear and second gear. Put the bike in first gear then push up that should put it in neutral.