0
Why does your headlight not work on your L reg micra you have replaced the bulb but it still does not work there does not appear to be a fuse for the headlight?
Wiki User
∙ 18y ago
The fuse for the headlights are situated right in front of the battery. Because of the location of this fuse box,it gets bombarded with the weather which results in the terminals corroding badly and falling apart. I suspect if you look at this you will find your problem. Hope this helps
Wiki User
∙ 18y ago
Add your answer:
Earn +20 pts
Have replaced the bulbs in my Micra number plate light but they still don't work?
Just replaced both my lamps in the number plate on my Micra & they stayed off. Amazingly they came on when I lowered the boot lid & went off again each time I reopened & raised it. Looking for a wiring diagram now to see if there is a tilt switch somewhere.
What code for ignition sensor on Nissan Micra?
I've.changed.the ignition on Nissan micra 2000 it still won't stsrt
Replaced headlite bulb still not working whats next?
There could be a switch that has gone bad in the headlight. The entire assembly will more then likely need to be replaced.
Why does the right low beam headlight still not work after the bulb and fuse have been replaced in my 2004 Toyota solara?
What vehicle is this for?
Why does the driver side headlight on my 89 Nissan pickup still not work on the low beam when you have replaced the bulb?
most likely it is a fuse
I replaced a headlight bulb in the 2002 altima and it still doesn't work?
Check the headlight fuses located in the main fuse box. On a 2002 Nissan Altima the main fuse box is found inside the engine compartment.
2000 Windstar right high beam quit working so you replaced with known good bulb and still no right side highbeam?
check the fuse for the right headlight. it may be blown. YES, there is a fuse for each headlight.
Do it Yourself Headlight Replacement?
It is possible to take a car or truck to an automotive repair shop to have a headlight replaced when it has gone out. Headlight replacement is a relatively easy task, however, that can be done at home by anyone who knows how to use a screwdriver. Determine That the Headlight Needs to be Replaced The first step is to find out if the old headlight really needs to be replaced. It is possible that the light has stopped working for reasons other than it has burned out. Check to make sure that the fuse for the headlights is still good. Wiggle the headlight or screw it in more tightly to make sure that the connection is sound. If that does not work, remove the headlight and look to see if the filament has been broken. If so, you will need to find a replacement headlight. Purchase the Correct Headlight There are several different kinds of headlights because there are several different kinds of cars. Many of the cars produced in the last 10 years are equipped with headlights that are not supposed to be removed from the car. The only part that has to be replaced on these cars is the tiny bulb that fits in behind the headlight. You can remove the bulb by twisting it and pulling it free from the headlight assembly. Some older cars require that you purchase the entire headlight assembly in order to replace a burned out bulb. You can find a list of headlights for all makes and models at your local auto parts store. Removing the Headlight and Replacing it When you have the replacement bulb and are ready to put it in the car, all you have to do is reverse the action you took to pull out the old headlight. If you are only replacing the bulb, slip the new bulb into the base and then push it through the hole in the back of the headlight. Twist it to make sure it is secure and you are done. If you need to replace the entire headlight assembly, unscrew the screws that attach the headlight to the car. Disconnect the old light and connect the new one.
2000 camaro dash lights not working. I replaced the headlight switch and still nothing. But if I jump the switch dash lights come on. So light bulbs do work.?
check the fuse for dash lights
You replaced the headlight switch on a 97 dodge ram and the lights still do not work?
I also own a 97 Ram 1500. Recently my headlights would go out when I tilted the steering wheel into the down position. I replaced the multi-switch (wipers, brights, turn signal) and the problem was solved.
I replaced my high beam light and fuse on my Saturn sl1 and it still doesn't work?
I do not know about the SL1, but often there is a relay for high current circuits such as headlights. You could check for proper operation of the high-beam headlight switch at the excitation terminal of the relay and check for headlight circuit energy at the output on the relay.
How does the headlight snap out on a 2002 buick rendezous?
please explain how the headlight comes out I removed wing nut and pulled white tabs and still nothing?
