If it is a gm 3800 you need to replace the upper intake. It has a crack in it.
no, it's connected to the exhaust manifold inlet
exhaust or inlet manifold?inlet distributes fuel to all cylandersehaust collects gases from all cylanders and directs to one out let
replace the water heater inlet pipe on the intake manifold on a 3800
underneath the inlet manifold.
They are inside the inlet manifold (Penum) to get access you need to unbolt the top half of the penum .The bottom half can stay bolted to the engine block . the plenum is the curved inlet manifold with the throttle body attached to it & the vortec name plate on top. Inside the plenum the fuel injection lines of the multipoint injection system run to the injectors at the end of each line.
On the 12 valve engine it is positioned underneath the inlet manifold at the gearbox end to replace I found it easier to remove the inlet manifold after wasting time trying to do it with the manifold in place.
Intake or inlet manifold has nothing to do with the heating of the car. Newaz.
Inlet or Exhaust?
cast iron
the alternator is located under the inlet manifold
if you mean firing order , it is written on the inlet manifold
On most vehicles it will be a cast alluminum, that will be machined accordingly.