replace the ignition swith. replace the ignition swith.
If this has the locking tilt wheel it is better to find a salvage yard and get the entire steering assembly . Can get for around $100. Parts and time for replacing the Ignition assembly if you can do it at all will not be worth the effort.
Door Assembly
on what kind of car
You need to hold the central locking button down and turn the ignition on and the off, Should work.
It is lubricated during assembly.
First remove the fuel tank then remove the pump assembly locking ring then remove the pump assembly.
Doors are not locking and the dashboard says boot open whenever the ignition key is turned on
In most cases it has something to do with central locking or a key code on the ignition.
Remove the cowlings from the steering column around the lights/indicator stalks. Insert key and turn to position "I",push in the locking pin on top of the lock barrel with a small screwdriver and withdraw the locking assembly.Take the new lock and set to "I" again,if steering lock was not released before starting the removal,you may need to push down the steering blocking pin with a screwdriver down the hole.Otherwise,just insert the locking assembly until it clicks in.
Turn ignition on and off quickly 4 times, remove key from ignition, you will then hear tone, point ignition key towards interior light and operate the central locking. This will reset it.
switch ignition on press lock button for 10 secs switch ignition off leave for 5 secs your remote should be coded
Open the hood there are to locking pin above each headlight assembly. Turn them you unlock them and pull the up. Once they are removed the headlight assembly can be removed.