You'll blow a gasket .
You'll blow a gasket .
If you overfill the engine oil you can damage the engine. The crankshaft will make contact with the oil causing it to form a froth of oil and air which is a poor lubricant.
If it has a stock, Original Equipment Manufacture, (OEM) oil pan then the pan capacity is 4 quarts. This engine requires 5 quarts with an oil and filter change, with a stock pan and stock filter. I stress, OEM! If it is not an OEM pan, then it may hold more. Be sure and not to overfill, as this will cause engine damage through cavitation.
There should be a cap on the valve cover, which unscrews. Be careful not to overfill the oil resivoir. Check the dipstick 30 seconds after adding oil, to allow the oil to flow from the head into the oil pan.
The engine oil pan is bolted to the bottom of the engine
It is on the bottom of the engine, when you lay down under the engine and look at the bottom of the engine, The oil pan is what your looking at.
engine oil pan is on bottom of engine transmission oil pan is on bottom of transmission
Bottom of the engine, on the oil pan.Bottom of the engine, on the oil pan.
The engine oil pan helps in storing extra oil for the car engine. This stored oil can be used for lubricating the engine. The oil pan is placed at the end of the engine. Generally you will find two types of oil pan, namely dry and wet pan. It also helps in covering the bottom area of the car engine.
Front of the engine, at oil pan level.Front of the engine, at oil pan level.
oil pan for engine is on bottom of engine oil pan for transmission is on bottom of transmission
On the oil pan, on the bottom of the engine.On the oil pan, on the bottom of the engine.