0
The oil pressure switch is bad.It is located in the back of the engine above the oil filter.Use a 27mm deep socket to remove it.Part costs about $40.00.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Why does your oil pressure gauge remain maxed when run?
Either the gauge or the gauge's sensor is broke. Has the oil & filter been changed in the vehicle lately?
Why is my oil gauge maxed out on your 2006 Chevy?
You oil pressure sending unit is more than likely defective. Replace it with a new one.
How do you fix the oil pressure gauge in a 2005 Pontiac Bonneville?
Go to a Pontiac Mechanic and spend a few bucks.
Should a GMC 2005 Sierra oil pressure gauge be maxed out at 80 psi and drop to zero around 60 mph?
It is most likely a faulty gauge, as they are known for having problems. My volts gauge does the same thing.
Why does the oil psi gauge show max reading when the engine is running on my 2000 Pontiac bonneville. It is o when off.?
Replace the sender unit
How many quarts of oil does a 96 Pontiac Bonneville take?
A 1996 Pontiac Bonneville requires 5.7 quarts of oil in the crankcase. The oil filter should also be changed with the oil.
What is the function of the oil gauge in a car?
The oil gauge shows the oil's temperature. The oil pressure gauge monitors the oil pressure for your viewing pleasure.
What are the possible causes for oil pressure to drop very low on a 1995 Pontiac Bonneville?
Low oil pressure can be caused by a number of problems, including inaccurate gauge or sending unit; thin oil due to poor oil quality; excessive oil pressure; broken oil pressure relief spring; oil inlet tube restriction or leak; or excessive oil pump or camshaft clearance.
Why does a Chevy 350 oil pressure gauge bounce now and then?
A mechanical oil gauge may bounce if you are low on oil. An electric oil gauge may bounce if the sending unit or the gauge itself is faulty and of course you are low on oil.
Where is the oil sending unit located on 1981 Pontiac Bonneville 265 engine?
The oil sending unit is located on the 1981 Pontiac Bonneville 265 engine is located on the Starter Disable Kit.
How do you install an oil pressure gauge on a zx2?
Connect the wiring harness to the back of your oil pressure gauge. Secure the oil pressure gauge with the retaining screws.
Is the 97 Bonneville SE oil pan plastic?
No, it's metal
